Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Rel Resp Fact A fixed multiple of the response factor of the component
found in the sample gas for indirect calibration.
Not editable unless the calibration type is set to Relative.
Rel Dens Liquid
15C
The relative density in kilograms per cubic meter (kg/m
3
) of
the liquid phase for the component at 15 °C.
Molar Mass The mass of one mole of the component.
Mult-level Calib
‘a’
Third-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Mult-level Calib
‘b’
Second-order polynomial coefficient for multi-level
calibrations.
Not editable unless the calibration type is set to Multi-Level.
Mult-level Calib
‘c’
First-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Mult-level Calib
‘d’
Zero-order polynomial coefficient for multi-level calibrations.
Not editable unless the calibration type is set to Multi-Level.
Component Code An index number that corresponds to the standard
component numbers taken from the American Gas
Association. Up to 20 components can be defined per data
table.
4.2.2 Add a component to a Component Data Table
To add a component to a component data table, do the following:
1. Select Component Data... from the Application menu.
The Component Data Tables window appears, displaying a list of available
component data tables.
Note
Other ways of accessing the component data tables are by pressing F6 or by clicking
from the Toolbar.
2. Select the table that you want to view.
The selected component data table displays.
Note
To sort the list of components by detector, and then by retention time, click Sort RT.
3. If you want to add the component above the currently selected component, click
Insert before. If you want to add the component below the currently selected
component, select Insert after from the Insert arrow.
Application
76