Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
New Value If applicable, indicates the value in the cell after change.
To view the list of change events, do the following:
1. To view all events, select the All checkbox. Otherwise, select the Select Range
checkbox and use the Start Date and End Date drop-down boxes to select a date
range.
2. Click Read Records.
The list of events display with the most recent event at the top and the oldest event
at the bottom. The events are also sorted and color-coded by time so that events
that occurred simultaneously are grouped together.
3. To save the list, click Save.
The list can be saved in the following formats:
• Tab-Delimited (.txt)
• Comma-Delimited (.csv)
• Microsoft Excel (.xls)
• HTML File (.html)
• XML File (.xml)
5.6 Reports
This function allows you to immediately display, print, or store pre-configured reports of
GC analysis data. Data is reported in real-time from the GC or from saved files.
5.6.1 Report types
MON2020 can generate the following types of reports:
Analysis Displays a list of the components that were detected, based on raw
data. Displays a list of calculations for each component, based on the
table located at Application → Calculations → Control.... See
Section 4.5.1 for more information.
There are two types of analysis reports: Analysis (GPA) and Analysis (ISO).
See Figure 5-1 for an example Analysis (GPA) report. See Figure 5-2 for an
example Analysis (ISO) report.
Calibration Displays a list of the components that were detected, along with each
component’s calibration concentration, raw data value, new response
factor, and new retention time. See Figure 5-3 for an example report.
Final
Calibration
The Final Calibration report displays the list of components along with
each component’s old and new response factors, and each
component’s old and new retention times, based on the averaged data.
See Figure 5-4 for an example report.
Logs and reports
118