Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5.7.3 Schedule the generation of reports
MON2020 can automatically generate and print each report according to the following
schedule:
Analysis (GPA) An analysis report will print after an analysis run is completed.
Note
If ISO is set in the Calculations Configuration screen, Analysis (ISO) will be listed
under the Report Name column instead of Analysis (GPA); if GPA & ISO is set in
the Calculations Configuration screen, the both Analysis (ISO) and Analysis
(GPA) will be listed under the Report Name column.
Calibration A calibration report will print after a calibration run is completed.
Final Calibration A final calibration report will print after a final calibration run is
completed.
Validation A validation report will print after a validation run is completed.
Final Validation A final validation report will print after a final validation run is
completed.
Every Run A report will be generated each time an Every Run average calculation
is run.
Hourly A report will be generated each time an Hourly average calculation is
run.
24 Hour A report will be generated each time a 24 Hour average calculation is
run.
Weekly A report will be generated each time a Weekly average calculation is
run.
Monthly A report will be generated each time a Monthly average calculation is
run.
Variable A report will be generated each time a Variable average calculation is
run.
Raw Data Each time raw data is generated, a report will be printed.
To configure MON2020 to generate and print a report of your choosing based on that
report’s schedule of availability, do the following:
1. Select Printer Control... from the Logs/Reports menu.
The Printer Control window displays.
Note
MON2020 must be connected to the GC for the report to be printed.
2. To print a report after a run, check the appropriate checkbox from the Print After
Completion? column.
3. To print a report at a fixed interval, check the appropriate checkbox from the Print At
Fixed Interval? column.
Logs and reports
5
Logs and reports
131