Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Note
To save the changes and close the window, click OK. The current value of the analog output
displays in the Cur Val column, and is updated in real time.
3.8.3 Set the scale values for an analog output device
To set the zero scale and full scale, which are used when converting the analog output
value, do the following:
1. Select Analog Output… from the Hardware menu.
The Analog Output window displays.
2. Click on appropriate row under the Zero Scale column and enter a zero scale value.
3. Click on appropriate row under the Full Scale column and enter a full scale value.
4. Click OK to save the changes and close the window.
To save the changes and leave the window open so that you can monitor the analog
output’s progress, click Save.
3.8.4 Map a system variable to an analog output
To select the system variable on which to base the signal level of the analog output, do the
following:
1. Select Analog Output… from the Hardware menu.
The Analog Output window displays.
2. Select a new variable by clicking on the appropriate drop-down list under the
Variable column.
For a demonstration of how to use the context-sensitive variable selector, see
Section 1.11.
3. Click OK to save the changes and close the window.
Note
To save the changes and leave the window open so that you can monitor the analog output’s
progress, click Save.
3.8.5 Monitor the status of an analog output
To check an analog output device’s status, select Analog Output… from the Hardware
menu.
The operational status of each analog output displays under the Status column. There are
three possible status readings, and their meanings are as follows:
OK The analog output device is installed and is working correctly.
Hardware
66