Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
3.3.2 Check the status of the EPC
Note
This feature only works with the 370XA.
Select EPC on the Hardware menu. The EPC window opens.
Check the Status column to learn the current state of the EPC:
State Description
Ok EPC is working normally and controlling the
pressure to the set point.
Pressure Low The carrier pressure is too low.
Out of range The EPC is not able to control the pressure to
the desired set point.
3.3.3 Switch to a different EPC mode
Note
This feature only works with the 370XA.
1. Select EPC on the Hardware menu.
The EPC window opens.
2. Click the Switch field.
A drop-down listbox opens.
3. Select the appropriate mode.
Option Description
Auto Let's the GC control and maintain its pressure at the desired set point.
Manual Allows you to control the power output for the EPC valve by entering a value, in
the Fixed PWM Output field.
Not Used Shuts off the EPC.
4. Click OK.
The EPC will switch modes and the EPC window will close.
Hardware
54