Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
4. To save the changes and close the window, click OK.
Note
To save the changes without closing the window, click Save.
4.3.4 Set the cycle and analysis time
To set the cycle and analysis time, do the following:
1. Select Timed Events... from the Application menu.
The Timed Events Tables selector window appears, displaying a list of available timed
events tables.
Note
Other ways of accessing the timed event tables are by pressing F5 or by clicking from
the Toolbar.
Note
If only one timed events table is available, it will display immediately, bypassing the Timed
Evetns Tables selector window.
2. Select the table that you want to view. The selected timed events table displays.
The Analysis Time section is located on the lower right side of the Timed Events
window.
Note
To sort events by time, click the appropriate Sort button.
3. Click on the Analysis Time cell and enter a value, in seconds, between 0 and 3600.
4. Click on the Cycle Time cell and enter a value, in seconds, between 0 and 3620.
Note
The Cycle Time must be at least 10 seconds greater than the Analysis Time.
5. To save the changes and close the window, click OK.
Note
To save the changes without closing the window, click Save.
4.3.5 Remove an event from the Timed Event Table
To remove an event from one of the Valve Events, Integrate Events, or Spectrum Gain
Events tables on the Timed Events window, do the following:
Application
86