Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
The following table describes the relationship between templates and record
numbers:
Data Type Set-
ting
Other Setting(s) Result
Register tem-
plate
• Enter Data Addr val-
ue.
• Enter Record No. val-
ue.
• Enter Quantity value.
Read Quantity fields (i.e., the number of fields
specified by the Quantity setting) from the
specified Record No. of the register (Data
Addr).
Log template Enter Record No. value. Read all fields associated with the Record No.
• Enter Data Addr val-
ue.
• Enter “0” for the Re-
cord No. value.
Read all fields in all records for the specified log
register (Data Addr).
8. Click Edit Template.
The Template File window displays with a new template.
9. To open an existing template file, click Open.
The Select Template Configuration File dialog displays.
10. Locate and select the template file, and then click Open.
Template files are saved with the .cfg extension.
11. To edit the template, select a data type for each desired offset.
12. To change all offsets to the same data type, change the first offset to the desired
data type, and then click Auto Reset.
The data type for the remainder of the offsets switch to the data type of the first
offset.
13. To save the displayed file to disk, click Save As....
The Select Template Configuration File dialog appears. Type in a filename and click
Save.
14. 14. Click OK to apply your selections and return to the main window.
7.1.6 Set the log parameters
The Log Data window allows you to log the polled data to a specified file.
Note
The Log Data function is not necessary to transmit Modbus data. To disable this function, clear the
Enable Logging ‘Data’ Registers and Values check box on the Log Data window.
Tools
162