Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
12-28
2221
[RESTORE ERROR]
• The device information backuped by the device
data backup function is incomplete. (Turning
power supply OFF or reset is suspected.)
Do not return the data when this error occurs. Also,
delete the incomplete device information at the time
of this error occurrence.
■Collateral information
• Common Information:File name/ Drive name
• Individual Information:–
■Diagnostic Timing
• At power ON/ At reset
Reset the CPU module and run it again.
RUN:
Off
ERR.:
Flicker
CPU Status:
Stop
QnU
2225
[RESTORE ERROR]
The model name of the restoration destination CPU
module is different from the one of the backup
source CPU module.
■Collateral information
• Common Information:–
• Individual Information:–
■Diagnostic Timing
• At power ON/ At reset
Execute a restore for the CPU module whose name
is same as the backup source CPU module.
2226
[RESTORE ERROR]
• ·The backup data file is destroyed. (The content
of the file is different from the check code.
• Reading the backup data from the memory card
is not successfully completed.
• Since the write protect switch of the SRAM card
is set to on (write inhibited), the checked
"Restore for the first time only" setting cannot be
performed.
■Collateral information
• Common Information:–
• Individual Information:–
■Diagnostic Timing
• At power ON/ At reset
• Execute a restore of other backup data because
the backup data may be destructed.
• Set the write protect switch of the SRAM card to
off (write enabled).
2227
[RESTORE ERROR]
Writing the backup data to the restoration
destination drive is not successfully completed.
■Collateral information
• Common Information:File name/Drive name
• Individual Information:–
■Diagnostic Timing
• At power ON/ At reset
Execute a restore for the other CPU module too
because the CPU module may be damaged.
2300
[ICM. OPE. ERROR]
• A memory card was removed without switching
the memory card in/out switch OFF.
• The memory card in/out switch is turned ON
although a memory card is not actually installed.
■Collateral information
• Common Information:Drive name
• Individual Information:–
■Diagnostic Timing
• When memory card is inserted or removed
• Remove memory card after placing the memory
card in/out switch OFF.
• Turn on the card insert switch after inserting a
memory card.
RUN:
Off/On
ERR.:
Flicker/On
CPU Status:
Stop/
Continue
*1
Qn(H)
QnPH
QnPRH
QnU
*11
Error
Code
(SD0)
Error Contents and Cause Corrective Action
LED Status
CPU Status
Corresponding
CPU
*1 CPU operation can be set in the parameters at error occurrence. (LED indication varies.)
*11 The Universal model QCPU except the Q00UJCPU, Q00UCPU, and Q01UCPU.