Mitsubishi Electronics QSERIES Smoker User Manual


  Open as PDF
of 1204
 
App-115
8
8
8
8
A
6
7
8
Appendix2 CPU PERFORMANCE COMPARISON
Appendix 2.1 Comparison of Q with AnNCPU, AnACPU, and AnUCPU
*1 : The number of device points can be changed at the parameters.
*2 : QCPU uses V as an edge relay.
*3 : Instructions that used accumulators with the AnNCPU, AnACPU, and AnUCPU have different formats with
the QCPU.
*4 : Can only be used by the $MOV instruction with the Q00JCPU, Q00CPU, and Q01CPU.
*5 : The Q00JCPU does not have file registers.
*6 : Applicable to products with the first 5 digits of the serial number 04122 or higher
(Q00JCPU, Q00CPU, and QCPU).
*7 : Each 5 points of FX0 to FX4 and FY0 to FY4 can be used on the programs.
*8 : The number of points that can be used on the programs
*9 : The number of accessible points to actual I/O modules
*10 : The Q00UJCPU does not have file registers.%ParaEnd%
Appendix 2.1.2 I/O control mode
TableApp.2.2 I/O Control Mode
Symbol in table : Usable, ––: Unusable
*1 : The DOUT, DSET, and SRST instructions are direct output dedicated instructions.
There are no dedicated instructions for direct input.
*2 : Switching between the refresh mode and direct mode is conducted with an AnNCPU DIP switch.
Appendix 2.1.3 Data that can be used by instructions
TableApp.2.3 Data That Can Be Used by Instruction
Symbols in table : Usable, –– : Unusable
*1 : Applicable to products with the first 5 digits of the serial number 04122 or higher
(Q00JCPU, Q00CPU, and Q01CPU).
*2 : Usable with only the MOV instruction for the Q00JCPU, Q00CPU, and Q01CPU.
I/O control mode QCPU AnUCPU AnACPU AnNCPU
Refresh mode
*2
Direct
I/O method
Partial refresh instructions
Dedicated instruction
*1
–– ––
Direct access input
–– –– ––
Direct access output
–– –– ––
Direct mode
–– –– ––
*2
Setting Data QCPU AnUCPU AnACPU AnNCPU
Bit data
Bit device
Word device
(Bit specification required)
–– –– ––
Word data
Bit device
(Digit specification required)
(Digit
specification
required)
(Digit
specification
required)
(Digit
specification
required)
Word device
Double word data
Bit device
(Digit specification required)
(Digit
specification
required)
(Digit
specification
required)
(Digit
specification
required)
Word device
Real number data
*1
––
Character string data
*2
–– –– ––