Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7DQGEHUJ'DWD &RQILJXULQJ,QVWDOOLQJDQG2SHUDWLQJWKH7DSH6\VWHP
7DQGEHUJ'/73URGXFW0DQXDO
6HOHFWLQJ'HQVLW\
&$87,21
If the tape is not positioned at End of Data (EOD), a WRITE to the tape
will deny access to previously-recorded data beyond the current tape
position. To prevent this, position the tape to EOD, then perform the
WRITE. This condition is termed an “appended WRITE.”
127(6
1. Default capacity of a DLTtape
TM
III cartridge is 10.0 GB, native or
20.0 GB (compression ON).
2. Default capacity of a DLTtape IIIXT cartridge is 15.0 GB, native
(compression OFF), or 30.0 GB (compression ON).
3. Default capacity of a DLTtape IV cartridge is 40.0 GB, native
(compression OFF), or 80 GB, compressed. A capacity of 35.0 GB
native (compression OFF, or 70 GB, compressed OR 20.0 GB native
(compression OFF), or 40 GB, compressed, is user-selectable.
Various storage capacities can be selected by specifying the GHQVLW\ of the data to
be recorded on the tape media.
Using the DLTtape IV cartridge:
1. On all READ and all WRITE APPEND operations, the data density that
already exists on the tape cartridge remains the density.
2. When writing from BOT, tape density may be changed by:
• Using the Density Select Button on the front panel of the tape system.
8VLQJWKHIURQWSDQHO¶V'HQVLW\6HOHFW%XWWRQDOZD\VRYHUULGHVGHQVLW\
VHOHFWLRQYLDWKHKRVW
• Using the operating system to issue a density designation. In this case, the
yellow Density Override indicator on the tape system’s front panel is
extinguished, indicating an automatic or host density selection.
Native default capacity for the DLTtape IV is 40.0 GB (80.0 GB, compressed),
assuming the Density Select Button was not used or that host selection of density
via the operating system was not invoked.