Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7DQGEHUJ'DWD 6&6,&RPPDQGV
7DQGEHUJ'/73URGXFW0DQXDO
5($'&RPPDQGK
This command transfers one or more data blocks or bytes to the initiator starting
with the next block on the tape.
Bit
Byte
76543210
0 Operation Code (08h)
1 Logical Unit Number Reserved SILI Fixed
2 - 4
(MSB)
Transfer Length
(LSB)
5 Unused Reserved Flag Link
)LJXUH±5($'&RPPDQG'HVFULSWRU%ORFN²'DWD)RUPDW
)LHOG1DPH 'HVFULSWLRQ
SILI Suppress Incorrect Length Indicator. If the SILI bit is set to 1 and the
Fixed bit is set to 1, the target terminates the command with CHECK
CONDITION status, sense key set to ILLEGAL REQUEST, and
additional sense code of INVALID FIELD IN CDB.
If the SILI bit is 0 and the actual block length is different than the
specified transfer length, a CHECK CONDITION status is returned.
Within the sense data, the Incorrect Length Indicator (ILI) bit and Valid bit
will be set to 1. The sense key field specifies NO SENSE. The
information bytes are set to the difference (residue) between the
requested transfer length and the actual block length., or, in Fixed Block
mode, the difference (residue) between the requested number of blocks
and the actual number of blocks read. No more than transfer length
blocks are transferred to the initiator and the tape is logically positioned
after the block (EOM side).
7DEOH±5($'&RPPDQG'HVFULSWRU%ORFN²)LHOG'HVFULSWLRQV