Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7DQGEHUJ'DWD 6&6,&RPPDQGV
7DQGEHUJ'/73URGXFW0DQXDO
5($'326,7,21&RPPDQGKFRQWLQXHG
)LHOG1DPH 'HVFULSWLRQ
BOP Beginning of Partition. When set to 1, indicates that the logical unit
is at the beginning of partition in the current partition. When 0,
indicates that the current logical position is not at the beginning of
partition. Since the tape drive does not support more than one
partition, the value of this field will be 1 when at BOT.
EOP End of Partition. When set to 1, indicates that the logical unit is
positioned between early warning and the end of partition in the
current partition. When 0, it indicates that the current logical position
is not between early warning and end of partition.
BCU Block Count Unknown
BYCU Byte Count Unknown
BPU Block Position Unknown. This bit is never set: the setting of the
Block Type (BT) bit of READ POSITION’s CDB does not affect the
block address values returned.
PERR Position Error
First Block
Location
The block address associated with the current logical position: the
next block to be transferred between the target and initiator if a
READ or WRITE command is issued.
Last Block Location The block address associated with the current physical position: the
next block to be transferred to tape medium and from the target’s
buffer. If the buffer is empty, or has only a partial block, the same
value as First Block Location is reported. The first block or filemark
written onto the tape medium is at address 0.
Number of Bytes in
Buffer
The number of data blocks in the target’s buffer.
Number of Bytes in
Buffer
The number of data bytes in the buffer that have not been written to
the tape medium.
7DEOH±5($'326,7,21'DWD²)LHOG'HVFULSWLRQV