3D Innovations DLT8000 Gas Grill User Manual


 
7DQGEHUJ'DWD 6&6,&RPPDQGV
7DQGEHUJ'/73URGXFW0DQXDO 
/2*6(16(&RPPDQG'KFRQWLQXHG
1 Read Warning Warning Problems reading data. There is no loss of data, but the tape
drives performance is reduced.
2 Write Warning Warning Problems writing data. There is no loss of data, but the
capacity of the tape is reduced.
3 Hard Error Warning An error has occurred during a read or write operation that the
tape drive cannot correct: operation has stopped.
5 Read Failure Critical The tape medium or the tape drive is damaged. Contact a
service representative.
6 Write Failure Critical The tape medium is faulty or the tape drive is damaged. Test
the tape drive using a known-good tape cartridge. If the
problem persists, contact a service representative.
9 Write Protect Critical The tape cartridge is write protected. Set the write protection
switch to enable writing, or use a different tape cartridge.
10 No Removal Informational The tape drive is busy and the tape cartridge cannot be
ejected. Wait for the operation to complete before attempting
to eject the tape cartridge.
11 Cleaning Media Informational The tape cartridge in the tape drive is a cleaning cartridge. For
normal tape drive data-related operations, replace the cleaning
cartridge with a data tape cartridge.
20 Clean Now Critical The tape drive needs to be cleaned. Make sure that all tape
operations have completed, eject the data tape cartridge and
follow the appropriate steps to use a cleaning cartridge.
* Severity levels are , and . Informational flags provide a status-type
message, Warning and Critical flags indicate that user intervention and/or service call may be required.
7DEOH±7DSH$OHUW)ODJV6HYHULW\/HYHOVDQG0HDQLQJV