Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7DQGEHUJ'DWD &RQILJXULQJ,QVWDOOLQJDQG2SHUDWLQJWKH7DSH6\VWHP
7DQGEHUJ'/73URGXFW0DQXDO
(OHFWURVWDWLF'LVFKDUJH(6'3URWHFWLRQ
Various electrical components on/within the tape system are sensitive to static
electricity and Electrostatic Discharge (ESD). Even a static buildup or discharge
that is too slight to feel can be sufficient to destroy or degrade a component’s
operation.
To minimize the possibility of ESD-related damage to the system, we strongly
recommend using both a properly installed workstation anti-static mat and a
properly installed ESD wrist strap. When correctly installed, these devices reduce
the buildup of static electricity which might harm the system.
Observe the following precautions to avoid ESD-related problems:
• Use a properly installed anti-static pad on your work surface.
• Always use a properly fitted and grounded wrist strap or other suitable ESD
protection when handling the system and observe proper ESD grounding
techniques.
• Hold the system only by its sides. Do not touch any components on the PCBA.
• Leave the system in its anti-static bag until you are ready to install it in the
system.
• Place the system on a properly grounded anti-static work surface pad when it is
out of its protective anti-static bag.
• Do not use the bag as a substitute for the work surface anti-static pad. The
outside of the bag may not have the same anti-static properties as the inside. It
could actually increase the possibility of ESD problems.
• Do not use any test equipment to check components on the PCBA. There are
no user-serviceable components on the system.