3D Innovations DLT8000 Gas Grill User Manual


 
7DQGEHUJ'DWD 6&6,&RPPDQGV
 7DQGEHUJ'/73URGXFW0DQXDO
02'(6(16(&RPPDQG$K$KFRQWLQXHG
)LHOG1DPH 'HVFULSWLRQ
PS Parameters Savable. Must be 0, the supported parameters cannot
be saved (savable pages are not supported).
Additional Page
Length
This field indicates the number of bytes in the page. Note that this
value does not include bytes 0 and 1. The length is returned on
MODE SENSE and must subsequently be set to the same value
when performing MODE SELECT.
TB Transfer Block. The Transfer Block (when not fully recovered)
function is not supported.
EER Enable Early Recovery. This function is always enabled
(must be = 1).
PER Parity Error. This bit enables reporting of CHECK CONDITION for
recovered READ / WRITE errors. Default is 0.
DTE Disable Transfer on Error. Set to 0. This feature is not supported.
DCR Disable ECC Correction Bit. Set to 0. This feature is not supported.
READ Retry Count This field reports the maximum number of re-reads that are
attempted before declaring an unrecoverable error.
WRITE Retry
Count
This field reports the maximum number or overwrite retries that are
attempted before declaring an unrecoverable error.
7DEOH±5($':5,7((UURU5HFRYHU\3DJH²)LHOG'HVFULSWLRQV