3D Innovations DLT8000 Gas Grill User Manual


 
7DQGEHUJ'DWD 6&6,&RPPDQGV
 7DQGEHUJ'/73URGXFW0DQXDO
02'(6(/(&7&RPPDQGKKFRQWLQXHG
)LHOG1DPH 'HVFULSWLRQ
PS Parameters Savable. For MODE SELECT, this bit must be 0.
Additional Page
Length
This field indicates the number bytes in the page. However, the
value does not include bytes 0 and 1. The length is returned in
MODE SENSE commands and must subsequently be set to the
same value when performing MODE SELECT. If the page length
does not match that expected by the drive, a CHECK CONDITION
status is returned, sense key set to ILLEGAL REQUEST.
The drive returns a CHECK CONDITION status with sense key set
to ILLEGAL REQUEST if it receives an unsupported Page Code or a
Page field with values not supported or changeable. In such cases,
no parameters are changed as a result of the command.
TB Transfer Block. Not supported.
EER Enable Early Recovery. Set to 1 (always enabled).
PER Post Error. Default is 0. When set to 1, this bit enables reporting of
Check Condition to report recovered READ / WRITE errors.
DTE Disable Transfer on Error. Must be 0. Not supported.
DCR Disable ECC Correction. Must be 0. Not supported.
Read Retry Count This field reports the maximum number or rereads that are
attempted before declaring an unrecoverable error.
Write Retry Count This field reports the maximum number of overwrite retries that will
be attempted before declaring an unrecoverable error.
7DEOH±5($':5,7((UURU5HFRYHU\3DJH²)LHOG'HVFULSWLRQV