Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7DQGEHUJ'DWD 6&6,&RPPDQGV
7DQGEHUJ'/73URGXFW0DQXDO
6(1'',$*1267,&&RPPDQG'KFRQWLQXHG
)LHOG1DPH 'HVFULSWLRQ
Block Count This field specifies how many blocks to WRITE / READ to
and from starting on track 0, then moving to track 1. For
example, if the Block Size and Block Count fields result in
three (3) tracks worth of data, the test will:
1. Write tracks 0, 1, 2
2. REWIND, READ, and VERIFY tracks 0, 1, 2
3. WRITE three tracks starting with 1: 1, 2, 3 and then
REWIND to the beginning of track 1 and perform the
READ and VERIFY pass.
If Block Count is = 0, data is written until EOT is reached
each time, so almost four (4) complete passes over the tape
would result. Note that for BHC Test*, the value of this field
must be 0.
* The BHC feature is provided for use only by a trained service provider.
7DEOH±6(1'',$*1267,&3DUDPHWHU/LVW²)LHOG'HVFULSWLRQVFRQWLQXHG
127(
Because of data generation and verification, this test only streams the
tape for short periods of time. If Block Count is set very high, therefore,
the test can take many minutes or even many hours to complete
127(
If BHC* test runs and passes, a GOOD status is returned.
If BHC* test runs and fails, a CHECK CONDITION is generated, with a
sense code containing the following:
Sense Key = 04h (Hardware Error)
ASC = 84h (BHC Result)
ASCQ = 01h (BHC Failed)
* The BHC feature is provided for use only by a trained service provider.