3D Innovations DLT8000 Gas Grill User Manual


  Open as PDF
of 391
 
7DQGEHUJ'DWD 6&6,&RPPDQGV
7DQGEHUJ'/73URGXFW0DQXDO 
02'(6(/(&7&RPPDQGKKFRQWLQXHG
1DPH 9DOXH5HS 'HIDXOW
/HQJWK
%\WHV 8VDJH
LOADERLUN ASCII Decimal 1 1 1 - 7 = LUN to report media loader
device on.
REWINDONRESET ASCII Binary 1 1 0 = Do not rewind on BUS RESET or
BDR message (CAUTION: May
have partial block data written to
tape if reset occurs during
WRITE).
1 = Rewind the tape medium to BOT
on reset.
ENALDRAUTOLD
ASCII Binary 1 1 To turn on/off sequential loading with
loader
DISLDRAUTODMC
ASCII Binary
1 1 To partially disable sequential loading
with loader if any media loader
command has been received.
ENAPARERRRETRY
ASCII Binary
0 1 To turn on/off parity error retry feature
ENAMODEPG22
ASCII Binary
0 1 To enable vendor unique Data
Compression (Status Mode Page)
NODISCONFXDBLK
ASCII Binary
1 1 To turn on/off feature that prevents
disconnecting on every fixed block
data transfer
PROTECTDIRONWP
ASCII Binary
0 1 To protect tape directory if the
cartridge write-protect switch is in its
write protect position.
ENACLNGLTRPT
ASCII Binary
1 1 To report error status if cleaning
indicator is on.
LONGXPORTPAGE
ASCII Binary
1 1 To report 18 or 6 bytes medium
transport element status descriptor if
parameter is on or off.
SCSIINQVS
ASCII Binary
0 1 To return vendor unique inquiry string,
if set.
DEFSEW
ASCII Binary
1 1 To set default SEW parameter.
ENAINITSYNCNEG
ASCII Binary
0 1 To enable target-initiated
synchronous negotiation, if set.
REPORTRCVDPERRS
ASCII Binary
1 1 To report recovered error if parity
error has been retried successfully, if
set.
ENATHIRDPTYDENS
ASCII Binary
1 1 To make non-DLT density code act as
the default density (same as density
code 0), if set.
7DEOH±((35209HQGRU8QLTXH3DJH3DUDPHWHUVFRQWLQXHG
 previous next