3D Innovations DLT8000 Gas Grill User Manual


  Open as PDF
of 391
 
7DQGEHUJ'DWD $SSHQGL[(
( 7DQGEHUJ'/73URGXFW0DQXDO
9,68$/0(&+$1,&$/,163(&7,21352&('85(
:KHQVKRXOG\RXSHUIRUPDYLVXDOPHFKDQLFDOLQVSHFWLRQ90,RQD
'/7WDSHFDUWULGJH"
<RXVKRXOGGRD90,
• As a general practice whenever you change or load a new
tape cartridge
• If a tape cartridge is dropped or subject to some hard physical
shock
• If the DLTtape drive becomes inoperable after loading a tape
cartridge
• If you receive a shipment of tape cartridges that show any sign
of shipping damage
Follow these steps to visually inspect a DLTtape cartridge:
1. Remove the tape cartridge from its protective plastic case.
2. Look at the tape cartridge to check for any obvious cracks or other physical
damage. Look for broken or missing parts.
3. Gently shake the tape cartridge. Listen for any rattling or sounds of any
loose pieces inside the cartridge. ,I\RXKHDUDQ\WKLQJORRVHLQVLGHGRQRW
XVHWKHFDUWULGJH.
4. Hold the tape cartridge so that the end of the cartridge that is inserted into
the DLTtape drive is facing you, as shown in Figure E-1. You will see that
there is a small opening on the left-hand side of the tape cartridge.
 previous next