3Com FE100 Gas Grill User Manual


  Open as PDF
of 98
 
Configuring the Cluster Software 3-5
5X QQLQJ'HO O2SHQ0DQDJH 'DWD$GPLQLVWUDWRUL QD&O XVWHU
You should always use the cluster name instead of the node name to connect to the Data
Agent. Using the cluster name to connect to the Data Agent ensures that the Administra-
tor can always connect to the Data Agent regardless of which server is running the Data
Agent. You can use one of three methods to specify the cluster name to the Data
Adminstrator:
Create a .host file in your home directory containing the name of the cluster.
Create a different file with the cluster name in a directory other than your home direc-
tory, and specify the location of the file using the RAID_ARRAY_HOSTS variable.
If the previous two options are not available, specify the cluster name in the Data
Administrator’s Host Administration window.
Refer to the
Dell OpenManage Data Agent Installation and Operation Guide
and the
Dell
OpenManage Data Administrator Installation and Operation Guide
for instructions on
using the Dell OpenManage Data Agent and the Data Administrator.
5XQQLQJ' HOO2SHQ0DQDJH'DWD6XSHUYLVRULQD&OXVW HU
To ensure that the Data Supervisor can always connect to the Data Agent, regardless of
which node is running the Data Agent, the Data Supervisor needs to connect to the Data
Agent using the cluster name instead of the node name.
Before you can run the Data Supervisor application program, you must know the name
associated with the storage processor (SP) that Data Supervisor will manage. To get the
device name and then run Data Supervisor, use the following procedure:
1. Verify that the Dell OpenManage Data Agent service is running.
2. Go to the Dell OpenManage CLI program directory, and type the following command:
omcli -h
hostname
getagent
For
hostname
, type the name of the cluster.
The output from the command lists the SP devices and their node names. The device
name is the name labeled "Node" for each SP device.
3. Start the Supervisor application.
A query window opens with the following message:
Enter the "
hostname devicename
”
For
hostname
, type the name of the cluster and for
devicename
, type the device
name reported by the omcli command.
Refer to the
Dell OpenManage Data Supervisor Installation and Operation Guide
for spe-
cific instructions on using the Dell OpenManage Data Supervisor.
 previous next