Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Getting Started 1-3
— A minimum of 256 megabytes (MB) of random-access memory (RAM)
— A minimum of two QLogic QLA-2100 or QLA-2100F Fibre Channel host bus
adapters in each PowerEdge system
— Two 4-gigabyte (GB) internal hard-disk drives connected to a PowerEdge
Expandable RAID Controller or the integrated small computer system inter-
face (SCSI) controller
— One Intel Pro/100+ NIC for the node-to-node interconnect
— One Intel Pro/100+, Intel Pro/10+, IBM
®
PCI 16/4 Token Ring, or Adaptec
ANA-6922 NIC for the public LAN
Power cabling and distribution components needed to comply with your region’s
requirements. Contact your Dell sales representative for specific power cabling
and distribution requirements for your region.
NOTE: Dell strongly recommends the use of uninterruptible power supplies
(UPSs) to support your nodes and shared storage device.
A “crossover” Category 5 unshielded twisted-pair (UTP) cable to connect the
NICs of cluster nodes that are used for node-to-node interconnect.
NOTE: An Ethernet switch can be used in place of the crossover cable.
Interface cabling from the QLogic host bus adapters to the PowerVault storage
system, as follows:
— For QLA-2100 host bus adapters, use copper cables with High-Speed Serial
Data Connectors (HSSDCs) to DB-9 connectors for connecting to the Power-
Vault 65
x
F storage system.
— For QLA-2100F adapters, use optical fiber cables (multimode) with duplex SC
connectors and media interface adapters (MIAs) for the DB-9 connectors on
the PowerVault 65
x
F storage system.
One Dell PowerVault 65
x
F storage system for the shared disk resource with the
following configuration:
— Two storage processors (SPs), each with 64 MB of RAM
— Two standby power supplies (one for each SP) to enable the write-cache
feature
— Ten hard-disk drives in the Disk-Array Processor Enclosure (DPE)
NOTE: Microsoft Cluster Server currently supports only the Microsoft
Windows NT file system (NTFS) format for the shared storage subsystem.
In addition to the preceding hardware components, the following software compo-
nents are also required:
Windows NT Server, Enterprise Edition 4.0 operating system installed on the
PowerEdge systems. Two Windows NT Server, Enterprise Edition licenses are
required, plus workstation licenses for all the client systems running on the
network.