Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Startup
Liebert
®
CRV
™
50
Figure 40 Rack setup screen, page 3 of 3
Once a sensor has been assigned to either control or display its temperature data, a custom label can
be assigned to the sensor. This step is not required for the sensor to operate but does provide a logical
name for identification. Navigate using the arrow and enter keys to highlight the Assign Names
number range. Once the range is selected then press the Enter key to move to the rack location blocks
at the bottom of the screen. The Up and Down arrow keys can be used to select any alpha or numeric
value up to four positions.
Figure 41 Rack overview screen
If the Rack Setup menus are configured in the Service menu to locate and label the remote rack
sensors, then the Rack View in the User menu should look similar to the screen above. This screen
will show the node number at the top of each block, the label and the actual temperature that each
sensor is currently measuring.
Rack Setup (page 3 of 3)
Liebert CRV = CRV
No Sensors = NoS
No rack = [blank]
Sensor Note = 01-10
Assign Names:
01-06
07-12
13-18
19-22
02 00 00 00000001 03 04 05 06
DC01 DC03
DD02
DC05 DC07
DD04
CRV
DC09 DC11
00 00 00 00080700 CRV000000
Cold Aisle
Use the navigation keys to move from rack to rack,
Enter to select a rack, and up- or down keys to
scroll through options.
UNIT 01
Rack Overview (page 1 of 1) UNIT 01
Cold Aisle
RAC1
71.4
EMAL
72.8
BLAD
69.4
RAC4
70.1
DC07
74.5
RAC6
71.0
72.4
06KW
69.3
CRV1
70.8
DISC
All temperatures shown in °F
01 02 03 04 05 06
07 08 CRV