Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
23
Operation
Lighting The Infrared or Rotisserie Burner
1. Open the hood.
2. Push in and turn counter clockwise the gas control knob
for the IR (infrared) burner to the HI position. This is the
knob farthest to the left. On units with two IR burners,
the control knob for the right IR burner is the knob
farthest to the right.
3. “Push Igniter Button; a multiple clicking noise should be
heard from the igniter indicating a spark is being
provided to the burner.
4. If the burner does not light on the first try, repeat
immediately.
5. If the burner does not light within 5 seconds, turn the
control knob to the OFF position. Wait 5 minutes until the
gas clears before attempting to light it again.
6. Repeat the procedure or try “Manual Lighting
procedure” as shown below.
7. Upon successful lighting, repeat the process on any
other available IR burner you may wish to light.
Wait 5 minutes before re-lighting a HOT rotisserie burner.
Manually Lighting The Infrared or
Rotisserie Burner
1. Open the hood.
2. Push in and turn counter clockwise the gas control
knob for the IR (infrared) burner to the HI position.
3. Hold a lit long stem match next to the burner ports.
4. If the burner does not light within 5 seconds, turn the
control knob to the OFF position. Wait 5 minutes until
the gas clears before attempting to light it again.
5. If the burner does not light after several attempts see
troubleshooting guide on page 37.
6. Upon successful lighting, repeat the process on any
other available IR burner you may wish to light.
Wait 5 minutes before re-lighting a HOT rotisserie burner.
operation
BURNER CONTROL KNOB
IGNITER BUTTON