Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
12
Air Shutter Adjustment (continued)
1. Repeat procedure for each burner requiring adjustment.
Be sure to tighten air shutter setscrews when finished.
2. Once adjusted, turn the burner OFF and reverse steps
to reassemble.
Low Setting Adjustment Grill and
Open Burners
The valves on your Dynasty grill feature an adjustable low
setting. Due to fluctuations in gas pressure, heating value or
gas conversion, you may feel it necessary to increase or
decrease gas flow in the low position.
1. Begin by lighting the burner.
2. Turn the control knob to the lowest setting, all the way
counter clockwise. The arrow will stop between MED
and LOW.
3. Remove knob.
4. Hold the valve shaft with a pair of pliers and insert a thin,
flat tipped screwdriver into the shaft. While viewing the
burner, adjust to a minimum stable flame.
5. WARNING! Look for stability in the low flame setting.
A too small burner flame may go out or be extinguished
easily. Unburned gas can then escape creating a
hazardous condition.
NOTE: It is normal to hear a popping sound when
the burners are first turned OFF.
installation
BEZEL
VALVE STEM