Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
CE4000 Cable Explorer TDR
User Manual
22
Cable Select Detail
To access the Cable Select selection screen (Figure 2-4), press
the Setup button on the keypad, highlight the Cable Select icon
using the arrow keys and press ENTER (F4).
Figure 2-4
SELECT A CABLE
For cable selection, select the Cable Select icon and use the Next
Set (F1) or Prev Set (F2) key to sequence through the pages of
cable data. Next, use the up/down arrows to highlight the cable
to be made active and then press the Select key (F3). The cable
type, manufacturer, VOP (velocity of propagation) and typical
loss of 100 feet of cable at 750 MHz are all displayed. The VOP
of the selected cable will be used in calculating the distance to
cable faults in the TDR mode. Cable data for approximately 50
common cable types is available.
Cable - Up to 10 characters describing the cable type.
Manufacturer - Up to 12 characters describing the
manufacturer of the cable.
VOP - Three digits describing the cable’s VOP as a
percentage to the nearest 0.1%.
Loss/100 feet at 750 MHz - The typical loss of the
cable at 750 MHz for a length of 100 feet.