Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Chapter 2
Setup
21
TIME & DATE
The time and date on the CE4000 is set from the System Setup
screen (Figure 2-3). The time and date are in the formats
hh:mm:ss and mm, dd, yy. Simply use the next field (F1) or the
Prev Field (F2) keys to highlight the parameter you would like
to change and use the Up/Down arrow keys to increment through
the choices. The clock in the CE4000 is set in a 24-hr time
format. Press Save to activate your choice and save the parameters
to memory.
SERIAL PORT SETTINGS
The serial port speed settings may be set by highlighting them,
using the Next Field (F1) or the Prev Field (F2) keys and then
choosing the desired value by pressing the Up/Down or Left/
Right arrow keys. Press Save to activate your choice and save the
parameter to memory.
Available Serial port speeds (baud rates):
115,200 and 19,200 and 9600.
UNITS
The CE4000 may be set to US measurement units of feet (ft) or
to meters (m).
PLOT FILL
The default mode is Disabled. In the default Disabled mode the
incidence pulse and reflections are displayed as a simple line
graph on the display. When Plot Fill is Enabled, the TDR trace
will be filled in under the trace to enhance the viewability.
PLOT 1 COLOR
The color of the main TDR trace may be selected from the list of
Magenta, Red, Cyan, Green, Blue, Black and Brown. The
default is Magenta.
PLOT 2 COLOR
The color of a second trace, used when comparing traces, may
be selected form the list of Magenta, Red, Cyan, Green, Blue,
Black and Brown. The default is Blue.