Sunrise Global Cable Explorer TDR Module Outdoor Kitchen Island User Manual


 
Chapter 1
General Information
15
First Time Module Installation
When installing the CE4000 into your existing CM1000
chassis, please follow these instructions carefully. The CE4000
module is shipped with a replacement CompactFlash memory
card. To install the module:
Memory Card Memory Card Cover Thumbscrew
Figure 1-4
1. Power down the CM1000.
2. Loosen the four module thumbscrews and remove
the CM1000 module. Be sure to place the CM1000
module in the optional carry bag or other safe
location.
3. Insert the CE4000 TDR module, seating it firmly
and tighten the four thumbscrews.
4. Remove the CompactFlash memory card cover,
eject and remove the original memory card. See
detailed instructions for memory card replacement
in the Service section of this manual.
5. Insert the new CompactFlash card, being sure that
it is fully seated in the socket (Sunrise label facing
down) and replace the cover.
6. Connect the AC charger to the CE4000.