Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
CE4000 Cable Explorer TDR
User Manual
18
The blue bar at the top of the screen provides current status
information for the module. The current screen name is shown
on the left side of the banner. In the center of the bar, the battery
status is displayed. A battery icon indicates the unit is on battery
power. An AC plug icon indicates the unit is externally powered.
The gauge to the right of the Power icon provides a relative
indication of battery status. This gauge indicates “charging”
when either an external power source is connected or the unit is
in charge mode. On the right side of the blue bar, the VOP and
Test Pulse width are displayed. At the bottom of the screen are
the function indicators that correspond with the F1 through F4
function keys.
Main Menu Screen Detail
The CE4000 is designed for easy-to-use operation. Any of the
menu choices may be selected by using the left/right or up/down
arrow keys and pushing either Enter (F4) or the Enter key. The
four Main menu choices are:
AUTO
Select the Auto TDR test mode by pressing Enter (F4) to initiate
an immediate series of automatic TDR tests. The CE4000 will
use the current (last used) VOP and automatically sequence
through the various pulse widths available, testing the connected
cable. It will configure the display to provide the best
representation of the first fault on the cable under test. The loss
of the cable under test (at the frequency of the test pulse) and the
distance to the fault are displayed at the bottom of the screen.
MANUAL
Choose the Manual mode to make adjustments to pulse width,
vertical gain, horizontal gain and position, and to set cursors for
measuring distance and loss. Operational details are provided in
Chapter 3. The initial Manual screen uses the first Auto test
screen as a starting point.
STORED DATA
The Stored Data menu provides access to the data files stored as
a result of screen saves. Operational details are provided in
Chapter 3.
SETUP
Provides access to the CE4000 Setup and Configuration icon
screen. Setup includes Select Cable, Cable Test and System
Setup.