Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
©Titan Tool Inc. All rights reserved. 15
English
Solution
1. Fluid not atomizing correctly:
Increase fluid pressure. Change to smaller
tip orifice size. Reduce fluid viscosity.
Reduce hose length. Clean gun and
filter(s). Reduce number of guns using
pump.
1. Same as above.
1. Clean or replace nozzle tip.
1. Inspect for suction hose leak.
2. Change to a smaller tip orifice size. Install
pulsation dampener in system or drain
existing one. Reduce number of guns using
pump. Remove restrictions in system; clean
tip screen if filter is used.
1. Replace tip.
2. Increase pressure. Thin material. Change
nozzle tip.
Cause
1. Inadequate fluid delivery
1. Inadequate fluid delivery
1. Plugged or worn nozzle tip
1. Suction leak
2. Pulsating fluid delivery
1. Worn tip
2. Fluid too heavy for tip
Spray Patterns
Problem
Tails
Hour glass
Distorted
Pattern expanding and
contracting (surge)
Round pattern
Troubleshooting
Patents
These products are covered by one or more of the following U.S. patents:
5,947,381 5,749,528 5,660,332 5,425,506 4,611,758 4,508,268
Material Safety Data Sheets (MSDS) are available on Titan’s website or by calling Customer Service.