Hearth and Home Technologies Crescent II Outdoor Fireplace User Manual


 
Heat & Glo • Crescent II • 2083-902 Rev. G • 9/05
33
Appliance Setup
12
A. Remove Shipping Materials
Remove shipping materials from inside and underneath the
firebox. A shipping bracket on the bottom front face must
be removed. Remove the screws and shipping bracket and
discard (see Figure 12.1).
Shock or fire risk.
Use ONLY optional accessories approved for
this appliance.
Using non-listed accessories voids
warranty.
Using non-listed accessories may result in
a safety hazard.
Only Hearth & Home Technologies
approved accessories may be used safely.
WARNING
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the firebox or underneath in the control cavity.
C. Accessories
Install approved accessories per instructions included with
accessories. See Service Parts List for appropriate ac-
cessories. Refer to Section 16.
Figure 12.1
REMOVE (4) NUTS
AND SHIPPING BRACKET
SHIPPING
BRACKET