Vermont Casting DVT38S2IN Outdoor Fireplace User Manual


 
28
Chateau™ Direct Vent Gas Fireplace
20011957
firebox. Tilt it carefully toward the side until the piece
is in place. Using the two (2) brackets and four (4)
screws provided with the refractory kit, fasten each
bracket to the top of the firebox on each side. NOTE:
Use existing holes in firebox.
4. Place the right and left hearth refractories at on each
side of the burner tube assembly.
5. Install the end hearth refractories and align with the
right and left hearth refractories already installed.
6. Reinstall the burner tube and fettle.
Unpack the logs from packaging and remove each log
from its wrapping material.
The logs are fragile and should be handled
with care. Keep the packaging materials
out of the reach of children and dispose of
the material in a safe manner.
Log, Lava Rock and Ember Placement
IMPORTANT: Review these instructions and famil-
iarize yourself with each log before beginning log
placement. Find the notches, pins and indentations
on each log. Follow the instructions closely, using
the Log ID (Fig. 41) and the illustrations to assist in
correctly placing each log.
Log Pilot Plumbing (F50)
Log Overlay (F56)
Log Grate/Burner Tube (F51) (2)
Log Right Grate (F49) (2)
Log Middle (F52)
Log Left Grate (F53) (2)
Log Front Upper Right (F47) (2)
Log Front Right (F48)
LG492
Log id
6/07
LG492
Fig. 41 DVT38Sw log identification.