Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Barbecue Owner’s Manual
Delivery and Set-Up
www.calspas.com
Delivery and Set-Up
Most cities and counties require permits for exterior construction and electrical circuits. In addition, some
communities have codes requiring residential barriers such as fencing and/or self-closing gates on prop-
erty to prevent unsupervised access to the property by children under the age of five. Your dealer can pro-
vide information on which permits may be required and how to obtain them prior to the delivery of your
equipment.
Safe and satisfactory operation of your new grill depends upon its proper installation. The installation,
adjustments and service of your new grill must be performed by C.A.I. qualified installers and service
technicians. This is necessary to ensure proper operation and prevent accidents.
Planning the Best Location For
Your Barbecue
Location
Your barbecue is for outdoor use only!
When planning your Cal Flame™ Island or cart location, be sure to consider the shortest gas line run pos-
sible. Also, take into consideration the necessity of having a 110V power source for use of your
appliances (e.g. lights, rotisserie, refrigerator, receptacles, etc.).
When determining a suitable location, take into account concerns such as exposure to wind, proximity to
traffic paths, and windows that open into the home.
Locate BARBECUE Islands grills and stainless steel carts in well ventilated areas, and only on
solid, flat foundations (e.g. cement slab or deck). Do NOT place barbecue islands / outdoor kitchens
or stainless steel carts on dirt or grass.
Built-in Installation
Your new grill is designed for easy installation into a non-combustible enclosure. The supporting deck
and counter must be level and flat. When determining the final location of your grill, provide ventilation
in the enclosure so that gas will not become entrapped in the event of a leak. Make sure that you have one
vent placed at floor level and the other at five inches above floor level.
Built-in Design Models
If using a rear wall, locate a weatherproof electrical outlet on the side of the grill that the rotisserie motor
will be located on. The rotisserie motor requires a 110/120V supply. The power supply cord on the motor
is equipped with a 3-prong (grounded) plug for protection against shock hazard. Do not cut or remove the
grounding prong from the plug.
Cabinet Cut-Out Dimensions for Gas Grill and Accessories
Safe and satisfactory operation of your new grill depends upon its proper installation. The installation,
adjustments and service of your new grill must be performed by C.A.I. qualified installers and service
technicians. This is necessary to ensure proper operation and prevent accidents.
Figures 1 through 4 show the four different kinds of cut-outs, the appliances each cut-out will accommo-
date, and the cut-out dimensions for each appliance.
Page 4
12/17/04