Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Removing and Replacing Parts 49
6 Remove a latch button from the bottom case assembly by squeezing
the snap tabs in the center of the latch.
Apply downward pressure to the tabs while squeezing them together
(tweezers work well) to eject the latch button from the bottom of the
case without loosening the upper latch assembly (spring and slider). If
the upper latch assembly does come loose:
a Reinsert the spring onto the slider, and reinstall both pieces in the
latch housing on the inside of the case.
b Ensure that the slider is inserted so that the side with the two
bumps is facing the back of the case, and the surface with the wear
ribs is facing the bottom of the case.
7 Hold the upper latch assembly in place while you snap the new latch
button in from underneath the base, making certain the snap tabs are
fully engaged in the slider.
8 Ensure that the newly installed latch assembly moves smoothly and
freely when pushed and released.
Battery Charger Board
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
64mcwc11.book Page 49 Tuesday, April 3, 2001 9:58 AM