Applied Energy Products C800 Gas Grill User Manual


 
44 Removing and Replacing Parts
www.dell.com | support.dell.com
Replacing the Reserve Battery
1 Seat the reserve battery and press it into place.
2 Connect the reserve battery cable.
3 Place the palmrest bracket loosely in the palmrest, and connect the
palmrest flex cable to the ZIF connector.
4 Replace the two 4-mm screws that secure the palmrest bracket to the
palmrest.
System Board Assembly
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
System Board Screws
4-mm capt
i
ve-
washer screws (3)
system board assembly
bottom case assembly
20-mm screw
64mcwc11.book Page 44 Tuesday, April 3, 2001 9:58 AM