Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Removing and Replacing Parts 39
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
Video Graphics Board
Removing the Video Graphics Board
1 Follow the instructions in “Preparing to Work Inside the Computer.”
2 Remove the keyboard.
3 Remove the hinge cover.
4 Detach the display flex cable from the strain relief and the graphics
card.
5 Remove the three 8-mm screws that secure the video graphics board.
6 Separate the video graphics board from the system board connector.
Replacing the Video Graphics Board
1 Align the three screw holes and press down firmly on the word “Dell”
to seat the board in its connector.
8-mm screws (3)
64mcwc11.book Page 39 Tuesday, April 3, 2001 9:58 AM