Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Removing and Replacing Parts 25
Keyboard Cable
7
Disconnect the keyboard cable and lay the keyboard assembly aside.
Replacing the Keyboard Assembly
1 While bracing the keyboard assembly upright on its left end, connect
the keyboard cable to the interface connector on the system board.
NOTICE: Position the keyboard/track stick flex cable so it is not pinched
when you replace the keyboard in the bottom case assembly.
2
Insert the metal tabs at the left end of the keyboard under the edge of
the bottom case assembly, and fit the keyboard into place.
3 Check that the keyboard is correctly installed. The keys should be flush
with the left and right surfaces of the palmrest.
4 Reinstall the four screws in the holes labeled “circle K.”
keyboard cable
64mcwc11.book Page 25 Tuesday, April 3, 2001 9:58 AM