Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Removing and Replacing Parts 19
NOTE: Memory modules are keyed to fit into their sockets in only one
direction.
2
Insert the memory module’s edge connector into the socket slot at a
45-degree angle and press the module firmly into the slot.
3 Pivot the module down until it clicks into place. If you do not hear a
click, remove the module and reinstall it.
4 Insert the metal tabs on the memory module cover into the bottom
case assembly, rotate the cover down, and replace the screw.
Mini PCI Card Assembly
You must remove the optional Mini PCI Card assembly before the system
board assembly can be removed. A Mini PCI Card assembly may consist of a
modem, a NIC, a modem and NIC combination, or a wireless NIC. A
modem, NIC, or modem and NIC combination must be connected to the
wiring harness as appropriate; a wireless NIC must be connected to the
system’s internal antenna.
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
64mcwc11.book Page 19 Tuesday, April 3, 2001 9:58 AM