Applied Energy Products C800 Gas Grill User Manual


 
22 Removing and Replacing Parts
www.dell.com | support.dell.com
Mini-PCI Wireless NIC Assembly Using Antenna Cable
NOTICE: If a wireless NIC card contains two mini-coax antenna connectors,
connect the mini-coax antenna cable to the
outermost
antenna connector on
the card as shown.
NOTICE: If you are installing a wireless NIC, fold and tuck the unused wiring
harness into the slot so it does not interfere with the cover.
3
Pivot the Mini PCI Card assembly down until it clicks into place.
4 Replace the Mini PCI Card assembly cover.
Keyboard Assembly
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
mini-coax
antenna cable
outermost
antenna connector
on card
connection to internal
system antenna
wiring harness
64mcwc11.book Page 22 Tuesday, April 3, 2001 9:58 AM