Applied Energy Products C800 Gas Grill User Manual


 
32 Removing and Replacing Parts
www.dell.com | support.dell.com
Flex Cable Connectors on Display Panel
Replacing the Display Panel
NOTE: Use a magnetic screwdriver to reassemble the display panel in the
display.
1
Connect the flex cable to the two connectors on the back of the
display panel.
2 Place the display panel assembly in the top cover, taking care that the
flex cable is in place and is not crushed or crimped.
ZIF connector
standard connector
64mcwc11.book Page 32 Tuesday, April 3, 2001 9:58 AM