Applied Energy Products C800 Gas Grill User Manual


 
Removing and Replacing Parts 17
Removing the Fixed Optical Drive
1 Follow the instructions in “Preparing to Work Inside the Computer.”
2 Loosen the captive screw on the bottom of the computer.
NOTICE: To keep the pull tab from catching on the captive screw, turn the
computer over before removing the fixed optical drive.
3
Turn the computer over, pull out the pull tab, and use the pull tab to
remove the fixed optical drive.
Memory Module
NOTICE: Disconnect the computer and any attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
Removing the Memory Module Cover
Memory Module Cover
20-mm screw
64mcwc11.book Page 17 Tuesday, April 3, 2001 9:58 AM