Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
38 Removing and Replacing Parts
www.dell.com | support.dell.com
NOTICE: Hold the microprocessor down while turning the cam lock screw to
prevent intermittent contact between the cam lock screw and microprocessor
(see “Microprocessor Cam Lock Screw”).
2
Tighten the cam lock screw.
NOTICE: Do not over- or undertighten the screw. Tighten it until the screw
indicator points to the “closed” or “locked” indicator on the socket.
3
Replace the microprocessor thermal cooling assembly.
Closing the Microprocessor Retaining Clip
4
While pressing lightly down on the center of the retaining clip, insert a
flat-blade screwdriver into the latch mechanism and pivot the top of
the screwdriver away from the clip to close the latch.
Video Graphics Board
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
64mcwc11.book Page 38 Tuesday, April 3, 2001 9:58 AM