3Com FSSBID 100 Gas Grill User Manual


 
99-00962-20 REV C0
25 | MODEL FSSBID 100: CONNECTING DEVICES INSIDE YOUR SMART MOBILE
STAND’S CABINET
Connecting a DVD/Blu-ray Player or VCR
Your SMART Mobile Stand supports audiovisual devices, including a DVD/Blu-ray
player or VCR. Internal connections provide support for a component video device
with stereo audio, and a composite video device with stereo audio.
CAUTION
If you install additional audio or video cables other than those provided with your
SMART Mobile Stand, SMART Board interactive display frame, SMART Board
for Flat-Panel Displays interactive overlay, or as part of an adapter kit, SMART
assumes no responsibility and you are solely responsible for any damage
incurred to your SMART Mobile Stand, its cabling or other devices.
IMPORTANT
The following procedures are generic instructions, and your DVD or Blu-ray
player or VCR’s connection panel might not resemble the illustrations or color
codes referenced in this guide. Refer to the documentation included with your
device for specific connection instructions.
For some DVD and Blu-ray players, you might choose to purchase a separate
HDMI cable to replace cable AV03. Install this HDMI cable along the same
path as cable AV03. See page 12 for details on connecting the other end of
this cable to your flat-panel display.
TIPS
Install your DVD or Blu-ray player on the top shelf or highest rack mount
position in your SMART Mobile Stand’s cabinet.
Install your VCR on the lowest shelf in your SMART Mobile Stand’s cabinet.