Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
75 Model 7500 Instruction Manual
Teledyne Analytical Instruments
<Code specication for ordering>
(1) Code symbols should be specied.
(2) Range combination should be the one allowed in separate tables.
(note 1) “Y” should be specied when only O2 measurement is necessary.
(note 2) External O2 sensor signal should be 0-1VDC linear of full scale, when “ B ” is specied at
the 6th digit.
(note 3) “C” should be specied when “ Y ” is specied at the 5th digit.
(note 4) Allowable combinations of ranges are specied in the Table 1 to 6 in page 9-7 and 9-8.
(note 5) Allowed only for CO analyzer.
(note 6) Allowed only for CO and CO2 analyzers.
(note 7) O2 correction is carried out for CO and SO2. At the same time, average value output
after O2 correction and O2 average value output are added. Peak count alarm is carried out for CO.
(note 8) “Y” should be specied when without O2 measurement (when 6th digit is Y).
(note 9) A gas composition table should be issued.
(note 10) Rated voltage of supplied power cable and plug conguration differ when “E” and “U” are
specied at the 10th digit. Select one from three power voltages. Plug conguration is North America type
when specifying “E”, and European type when specifying “U”.