Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
24
Models QS10 & QS22Troubleshooting Guide
Section 7 Tr oubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY
1. Grill will not heat. a. Power cord is not connected. a. Check the power connection.
b. Circuit breaker is tripped. b. Reset the circuit breaker.
c. Power switch is in the OFF
position.
c. Place the power switch in the
ON position.
d. Power switch is faulty. d. Contact a service technician.
e. Faulty relay or relay board. e. Contact a service technician
2. One heat zone will not heat.
(Indicator light is not on,
display flashing “TOO COOL”.)
a. Control is not set correctly. a. Check the temperature setting.
b. Faulty relay or relay board. b. Contact a service technician.
c. Unit displays a fault. c. Clear the fault. (See page 12.)
If the action is ineffective,
contact a service technician.
d. Faulty thermocouple. d. Contact a service technician.
3. One heat zone will not heat.
(Indicator light is on, display
flashing “TOO COOL”.)
a. Heater is faulty. a. Contact a service technician.
b. Thermocouple is faulty. b. Contact a service technician.
c. Thermo overload is faulty. c. Contact a service technician.
d. Faulty relay or relay board. d. Contact a service technician.
e. Unit displays a fault. e. Clear the fault. If the action is
ineffective, contact a service
technician.
4. One heat zone is overheating.
(Display flashing “TOO HOT”.)
a. Thermocouple is faulty. a. Contact a service technician.
b. Faulty relay or relay board. b. Contact a service technician
c. Unit displays a fault. c. Clear the fault. (See page 12.)
If the action is ineffective,
contact a service technician.
5. Upper cook surface will not
stay in the raised position.
a. Defective gas filled cylinder(s). a. Contact a service technician.