Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
23
Models QS10 & QS22 Operating Procedures
Step 10
Starting at the front of the upper cook surface and
the rear of the lower cook surface, rinse both
surfaces with a mist of water from a spray bottle.
WARNING! Use care not to allow water
or cleaner/degreaser on any part of the grill
other than the cook surfaces. Never use an
extreme amount of fluid to clean or rinse the
grill.
Failure to follow this instruction may result in
serious electrical shock and will cause
permanent electrical and mechanical damage to
internal parts.
Step 11
Use the rubber wiper squeegee to remove excess
liquid from the upper and lower surfaces.
IMPORTANT! Do not scrape the upper surface
with metal utensils. It is aluminum and will
scratch very easily.
Step 12
Repeat Steps 9 and 10 if necessary, but apply
cleaner only to soiled areas.
Step 13
Remove any small carbon spots with the rubber
squeegee.
Step 14
Using a damp cloth, wipe down all exterior stainless
steel of the upper cook surface (especially behind
the rear of the upper cook surface, next to arm
assembly).
Note: Grills should be removed from cooking
alcoves in order to clean the rear section of the
upper cook surface.
Step 15
Clean the lower grill by pouring a small amount of
warm water carefully on the surface while brushing
with a sturdy brush.
CAUTION: Wear rubber gloves to avoid
hot steam.
Step 16
Continue to add small amounts of water and brush
the surface until the grill is cool enough to squeegee
dry.
Step 17
Wipe the cook surface(s) twice with a clean, damp
towel.
Step 18
Wipe all areas of the grill with a clean, damp towel.
Step 19
Wipe all exterior stainless steel panels around the
entire grill.
CAUTION:
S Never use cold water or ice to cool the
upper cook surface or lower grill plate.
S Never use grill screens on the upper cook
surface or lower grill plate.
S Never use any other abrasives or cleaners
other than approved food service cleaners
and degreasers.
S Never spray excessive amounts of water on
the grill.
S Never pour or spray liquid of any type on
top of the upper cook surface.
Step 20
Place release material sheet(s) on the warm lower
grill plate and thoroughly wipe down both sides with
a clean, damp grill cloth.
CAUTION:
S Never attempt to clean release material
sheets on a cold surface.
S Never use a hot hose for cleaning release
material,
S Never soak release material sheets in liquid.
S Never fold, crease or touch release material
sheets with sharp objects.
S Never allow the grill scraper or abrasive
cleaning materials to come in contact with
release material sheets.
Step 21
Apply a light coat of shortening to the entire lower
grill plate.