Regency IG35-LPG Fire Pit User Manual


 
18
Regency IG35 Gas Inbuilt Fireplace
Heat Defl ector
Tab into Tab Bracket
Diagram 11
15) Completely mount the faceplate to the unit. .See diagram 13.
Diagram 13
Faceplate Installation:
16) Secure the faceplate in place
using 2 screws on the left and
right side. Diagram 14 shows
mounting on right side.
Diagram 14
17) Remove the wire harness from the valve. See diagram 15.
Diagram 15
Wire Harness
Valve
18) Undo the wire clip to the right side of the valve. See diagram 16.
Diagram 16
Wiring:
14) Install the heat defl ector to the unit by fi tting the tabs into the tab
brackets located on the underside of the fi rebox. See diagram 11.
Diagram 12 shows defl ector completely installed.
Thermodisc Installation:
Diagram 12
INSTALLATION