Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Constructing a Jack Field
The control unit must be placed within 5 feet of an ac outlet, within one cord
length (7, 14, 25 feet or up to a 400 feet of spooled DIW cable) of the network
interface, and 6 inches above a jack field. See Figure 38.
FIGURE 38 A well-positioned control unit.
At the location where you plan to install your control unit, do as follows:
1
2
3
4
Use the measurements in Figure 38 to mark positions on a wall (or other
mounting surface) for the control unit and the jack field. Also, check that
the distances from the control unit position to the ac outlet and the
network interface are within limits and that the control unit’s distance
from the floor allows for easy access.
Attach a label to the outside of the right door of each jack panel box.
Each label should identify the jacks in each box by wiring run number.
Attach the boxes to each other by meshing their tongues and grooves.
See Figure 39. Use only as many boxes as you need.
Use appropriate screws to attach the jack panel boxes to the mounting
surface.
Jack Field Wiring Supplement
47