Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
NOTE: The control unit power should be off at this point. However, if
the power is on and the other end of this modular voice terminal cord is
already plugged into the control unit, a red light may go on next to a
button when you plug the cord into the line jack on the voice terminal,
and the voice terminal may ring. Don’t be alarmed. The red light should
go on if the control unit power is on; go to the next step.
Find the Test/Program (T/P) switch on the left side of the voice terminal
and set it to the center position. If the switch is set to T or P, the voice
terminal rings as soon as you connect it to a system that is turned on.
Turn the power off at the control unit until you are ready to test the voice
terminals.
Find the volume control for the ringing tone, also on the left side of the
5
6
voice terminal, and slide it to the center position. See Figure 18.
FIGURE 17 Preparing the voice terminal desk stand or wall mount.
FIGURE 18 Setting the ringer volume control to the center.
Step 3: Connecting the Voice Terminals
23