Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5
HANDLING:
1. Government regulations prohibit shipping full LP gas cylinders. You must take your new cylinder to an LP
gas dealer for filling.
2. A filled LP gas cylinder is under very high pressure. Always handle with care and transport in the upright
position. Protect the valve from accidental damage.
3. Do not tip the LP gas cylinder while connecting it to the regulator. Fasten the cylinder securely during
transport, use and storage.
4. If the cylinder is tipped after it is connected to the regulator, shut off the gas, disconnect the regulator and
have it checked before using it again.
STORAGE:
1. Store the LP gas cylinders outdoors in a well-ventilated area.
2. Do not store the LP gas cylinders in direct sunlight or near a source of heat or combustion.
3. If you intend to store your grill indoors, disconnect and remove the LP gas cylinder first. Disconnected
cylinders must have plugs installed and must not be stored in a building, garage or any other enclosed
area.
4. Keep out of reach of small children.
5. When the LP gas cylinder is connected to the gas grill, the LP gas cylinder must be stored outside in a
well-ventilated area.
6. Keep the ventilation openings for the LP cylinder enclosure free and clear of debris.
OPERATION:
1. Never connect your gas grill to an LP cylinder without the regulator provided, and never to an
unregulated gas supply. The gas regulator supplied with the appliance must be used.
2. Always leak test the LP gas cylinder to regulator connection when connecting the LP gas cylinder to the
appliance. See “leak testing”.
3. Do not operate the appliance if the smell of LP gas is present. Extinguish all flame and determine the
source of LP gas before proceeding. Do not ignite the appliance until the LP gas leak has been found
and sealed.
4. Always shut off the LP gas cylinder valve when the appliance is not in use.