Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
4
LP GAS CYLINDER PLACEMENT:
Cylinders must be installed according to assembly instructions. Install the gas cylinder into the tank hole
inside of the Jackson Pedestal.
LP GAS CYLINDER:
QCC-1 Quick Closing Coupling
Your grill is designed to be used with an LP gas cylinder equipped with the new QCC-1 Quick Closing
Coupling system. The QCC-1 system incorporates new safety features required by the Canadian Standards
Steering Committee and the American National Standards Institute (ANSI).
Gas will not flow until a positive connection has been made.
A thermal element will shut off flow of gas between 240
degrees and 300 degrees F. When activated, a flow-limiting
device will limit the flow of gas to 10 cubic feet per hour.
The LP Gas Cylinder is not included with the Gas Grill. Be
sure to purchase one with the QCC valve. The external threads on
the inlet port of the valve recognize this valve. QCC equipped
cylinders are available from your gas grill dealer. Any attempt to
connect the regulator, by use of adapters or any other means, to any other valve could result in
damage or fire, and may negate the important safety features designed into the QCC-1 system.
SPECIFICATIONS:
All LP gas cylinders used with this appliance must be constructed and marked with the specifications for LP
cylinders in accordance with the Canadian Transport Commission (CTC)
1. or the US Department of Transport (DOT) for use in the USA.
2. The LP gas cylinder used for this appliance must not have a capacity larger than 20 lb. (9 kg):
approximately 18” (46cm) high & 12” (30cm) diameter.
3. All LP gas cylinders used with this appliance should be inspected at every filling and re-qualified by a
licensed service outlet at the expiry date (10 years) in accordance with DOT (USA) and CTC (Canada)
codes for LP gas cylinders.
4. All LP gas cylinders used with the appliance must be provided with a shut off valve terminating in a
cylinder valve outlet No. 510, specified in the Standard for Compressed Gas Cylinder Valve Outlet and
Inlet Connections (USA) ANSI / CGA-V-11977 (Canada) CSA B96.
The cylinder supply system must be arranged for vapor withdrawal. The cylinder must also include a collar to
protect the cylinder valve. As well, the cylinder valve must include a safety relief device having direct
communication with the vapor space of the cylinder.